When purchasing your blades at Superior Grinding & Sales, Inc., we will assist you to make sure you get the right blade for the right job. Not all blades perform the same. Since the paper industry is rapidly changing the content of its product, it is extremely important that the correct material, angles and surface finishes are used.

 

 

 

 

KNIVES FOR ALL TRIMMER MODELS

Types:

High-Carbon/High-Chrome ---this grade is anAISI d-2 tool steel. It has 12-14% chromium, which provides excellent wear resistance and usually out performs standard carbon steel by a 2 to 1 ratio. It is widely used for lower knives on stitcher trimmer machines.

High Speed Steel ---Superior s super high speed steel paper cutter knives are guaranteed to give you a minimum of three times more life than standard steel knives. The inlaid cutting edge contains 18% tungsten and is processed by a special patent during heat treating to make it the best high-speed steel blade on the market today. Also, it can be easily resharpened and has a wider insert to give longer life.

LongLife Carbide ---Carbide knives will last 10 to 25 times longer than steel knives. They are ideal for production runs since they substantially reduce downtime caused by frequent changing of conventional knives. Because of the great compressive strength, they have a high resistance to wear.

Megalife Carbide ---Carbide of a new Generation designed especially for use in the area of three-knife-trimmers. Here, new standards have been set. These knives are awesome most grind stations don t like them. There truly is not another knife on the market like them.

 

SUPERIOR PAPER KNIFE TYPES

 

HIGH-CARBON, HIGH CHROME

This grade is AISI D-2 Tool Steel. It has 12-14% chromium, which provides excellent wear resistance and usually out performs standard carbon steel by a 2 to 1 ratio. It is widely used for lower knives on Stitcher Trimmer Machines.

 

INLAID STEEL

Superior's Inlaid tool steel features deep, consistent hardness. Even after facing grinding. Special high alloy metallurgy prolongs life. Chip resistant, hand honed inlaid cutting edge inherently stable during resharpenings. Extra wide tool steel inlay allows many additional resharpenings.

 

HIGH SPEED STEEL

Superior's super high speed steel paper cutter knives are guaranteed to give you a minimum of five times more cuts than standard steel knives. The inlaid cutting edge contains 18% tungsten, which makes it the best high-speed steel available on the market today. Also, it can be easily resharpened due to the hardened inlay. Exceptional performance to price ratio lowers total cost per cutting hour. Extended life between grinds reduces downtime and increases machine utilization. Superior's high-speed steel knives contribute significantly to the company's profitability. The durable cutting edge is highly resistant to wear while the inlaid construction is extra wide to allow maximum number of regrinds.

 

TUNGSTEN CARBIDE

Superior's Tungsten Carbide knives will last 10 to 25 times longer than steel knives. They are ideal for production runs since they substantially reduce downtime caused by frequent changing of conventional knives. Because of their great compressive strength, they have a high resistance to wear. The high tech blade is designed to maintain a keen cutting edge for improved cut quality and less dust-even on acid-free and alkaline papers. You can trim full capacity lifts of paper with minimum size deviation from top to bottom sheet, Great performance on Three knife and Guillotine machines. Call we offer carbide installation and training classes.

 

MEGALIFE CARBIDE

Megalife carbide knives are knives of a new generation designed especially for use in the area of three-knife-trimmers. Here new standards have been set. Offers a third to a fourth of the endurance time, improved cutting quality with less dust development, and clearly reduced tendency of cutting edges breaking. Have also found in business form applications such as sheeters you will optimize our production output. These knives are sold by special order.

 

Since the paper industry is rapidly changing the content of its product, it is extremely important that the correct material angles and surface finishes are used. For further information or to place an order call. 1-888-487-9701.

 

Inlaid

 

How the Knife Is Made

 

A bar of soft steel is machined (see sketch 1), then a bar of tool steel (52100) is machined to fit the recess (see sketch 2). Both pieces of steel are placed in a furnace and heated ___f, cleaned with powdered flux, welding compound is applied, tool steel is placed in recess of soft steel (see sketch 3), reheated to proper welding temperature, pressed in a forging press.

 

Bar is then reheated and rolled to a bar approximately 160 long with sufficient width and thickness to allow for finish grinding to the proper size.

 

This bar is then placed in a furnace and annealed or softened to around 25 to 28 Rockwell C and straightened. The forging is then machined all over to a specific size, heated to hardening temperature, quenched in brine and hardened to maximum hardness. The material is then placed in the furnace and tempered back to 61-63 RC The material is cut to length, drilled, tapped, finished ground and beveled, ready for shipment. This knife works well in almost all applications. The bevel angle depends on what is being cut.

 

 

HCHC

This type of knife is usually made from solid, through hardening tool steel such as 52100, d-2, m-2, m-4, etc. It is basically used in small thin cross sections such as Stitcer Trimmer knives or sizzor action knives.

 

High Speed Steel

 

How is the knife made?

 

A bar of soft steel is machined (see sketch) and a bar of High Speed Steel is machined to fit the recess of the soft steel. The recessed area of the soft steel and the High Speed Steel insert is coated with flux or welding compound bronze or silver strips placed in the recess with High Speed Steel Strip. The bar is then heated to hardening and welding temperature pressed in the furnace to join High Speed Steel to soft body.


The forging is then tempered to 62-63 Rockwell C scale, straightened, machined, drilled, tapped, finish ground and finish beveled, Inspected and ready for shipment. If other steel knives fail, High-Speed steel should be used.

 

 Standard steel Knives

 

Machined Steel Heat-Treated 58-60 RC Drilled, Tapped, and finished ground. Inspected and ready for shipment. Good for small machines. And machines that are not used often.

 

TYPES OF PAPER KNIVES

(Note if what your looking for is not listed please call not all makes and models are listed)

ATLAS
 

Part#
20010
20020
20030
20040
20050
20060
20070
20080		 Size Holes
18.110 x 5.118 x .465
16.142 x 5.709 x .465
16.142 x 5.118 x .465
17.835 x 5.906 x .495
17.835 x 5.906 x .495
22.047 x 4.803 x .504
20.866 x 4.803 x .504
18.031 x 5.906 x .504		 Description
8H A25/35Top Front
6H Left Side
6H Right Side
6H 69 or 70 Auto (LH)
6H 69 or 70 Auto (RH)
8H 69 or 70 Auto (FRT)
8H A30-42H Front
6H Right & Left Sides

 

 

BAUMFOLDER
 

Part#
21000
21010
21020
21030
21040
21050		 Size Holes
34.750 x 4.000 x .375
37.795 x 4.213 x .381
53.000 x 5.000 x .496
59.000 x 5.000 x .496
64.000 x 5.000 x .496
73.000 x 5.000 x .496		 Description
12H 305 # 2238-2
PM80 2650070200
MPU-42 2BA4016
MPU-47 2BB4001
MPU-52 2BC4002
MPU-60 2BE5046

 

BRACKETT
 

Part#
22000
22010
22020
22030
22040 		Size Holes
11.125 x 2.250 x .250
20.500 x 5.000 x .498
24.750 x 5.000 x .498
32.000 x 5.000 x .498
32.000 x 5.000 x .498		 Description
4H #825 Tail Trimmer
8H SK-3048 Model A
8H 145 Model B-BT
12H Through holes
12H Blind holes

 

C.P. BOURGE

 

Part#
22050
22060		 Size Holes
14.980 x 3.543 x .472
15.118 x 1.575 x .590		 Description
9.212.375
9.212.376

 

CHALLENGE

 

Part#
24000
24010
24020
24030
24040
24050
24060
24070
24080
24090
24100
24110
24120
24130
24140
24150
24160
24170
24180
24190
24200
24210
24220
24230
24240
24250
24260
24270
24280
24290
24300
24310
24320
24330
24340
24350
24360
24370
24380
24390
24400
24410		 Size Holes
12.000 x 5.000 x .500
12.000 x 5.000 x .500
13.000 x 5.000 x .500
14.000 x 2.500 x .250
20.500 x 3.500 x .375
20.500 x 3.500 x .375
20.750 x 2.560 x .250
23.750 x 3.000 x .374
24.000 x 3.500 x .375
24.000 x 3.500 x .375
24.500 x 4.000 x .375
27.000 x 3.500 x .375
27.000 x 4.000 x .375
27.000 x 4.000 x .375
28.000 x 4.000 x .375
28.000 x 4.000 x .375
28.000 x 3.500 x .375
29.500 x 4.000 x .375
30.000 x 4.000 x .375
30.000 x 4.000 x .375
30.000 x 4.500 x .375
30.750 x 4.000 x .375
30.750 x 4.000 x .375
31.250 x 4.000 x .375
34.000 x 4.000 x .375
34.750 x 4.000 x .375
35.250 x 4.000 x .375
35.000 x 4.000 x .438
35.000 x 4.500 x .500
35.000 x 5.000 x .500
36.000 x 4.000 x .438
36.000 x 4.500 x .438
37.000 x 4.500 x .496
38.000 x 4.500 x .438
41.000 x 4.000 x .438
41.000 x 4.500 x .438
41.000 x 4.000 x .438
42.000 x 4.000 x .438
44.000 x 5.000 x .438
44.500 x 5.000 x .431
49.000 x 5.000 x .438
49.500 x 5.000 x .431		 Description
4H 3-Knife Right #6249
4H 3-Knife Left #6247
4H 3-Knife Front #6248
4H 13" 13-107
8H 16-16 1/4" Lever
8H 16" Advance 162 #2100
8H 155 Challenge #5023
4H Model 20,A10034
8H 193 H Challenge #2122-2
10H 193 Challenge 19" Advance
8H 193 Diamond #2122-4
10H 230H,#230-2122-2
10H Model 230MB
5H 22 1/2 Advance #2271
10H 230,230F 2212 5 13/16ctrs
5H 23 1/2" Advance # 2210
10H 23" lever 4 3/8 Centers
12H 25" Advance # 2270
12H 25 1/2 Advance # 2211
10H 265Cchallenge # 2263-1
12H 25" Challenge # 2272
12H 26 1/2" Advance #2263 5 5/8 ct
12H 265H #2263-2 4 9/32 cntrs
12H 265 Diamond # 2263-4
12H 305-C Challenge # 2238-1
12H 305CDC, H&M CHAL #2238-2
12H 305 Diamond # 2238-4
14H 30" Advance # 2238 305F
14H 30" Lever # 2273
14H 30" power # 2274
14H 30 1/2 Diamond #5-142-1
14H 30" Diamond #5-142
14H 32" Challenge #2275
14H 32 1/2" Diamond #6-142
14H 34 1/2 Diamond
14H 34" 34 1/2 35 1/2 Diamond
12H 36" 36 1/2 Diamond #8-142
12H 36 1/2 Diamond #8-142-1
18H 37" 370 Challenge #9-142
18H 37TCM Challenge #9-142.1
21H 420 Challenge #10-142
21H 42TCM Challenge #10-421-1

 

CHANDLER & PRICE
 

Part#
26000
26010
26020
26030
26040
26050
26060
26070
26080
26090
26100
26110
26120
26130
26140
26150
26160
26170		 Size Holes
23.000 x 3.250 x .375
27.000 x 3.250 x .375
27.000 x 4.000 x .375
27.000 x 4.000 x .438
30.000 x 4.000 x .375
30.000 x 4.000 x .438
34.000 x 4.000 x .375
35.500 x 4.000 x .375
36.000 x 4.000 x .500
38.000 x 4.000 x .375
38.000 x 4.000 x .500
40.000 x 4.000 x .375
40.000 x 4.000 x .500
44.000 x 4.000 x .437
45.000 x 4.000 x .437
50.000 x 5.000 x .500
55.000 x 5.000 x .500
60.000 x 5.000 x .500		 Description
4H 19" 1927A Design 1
 5H 23" BR2327 Design 1
 10H 23"HY 2327 Design 2
 10H 23" 2527
 12H 26" 2627 Design 2
12H 26" 2627
14H 30" 31 1/2 HY3027
14H 30" 31-410
14H 30" 3027
12H 32" HY 3227
14H 32" 3227
16H 34" x 3427A Craftsman
16H 34" x 3427 Craftsman
16H 37" x 3727
16H 37" HY 37-410
18H 39" 40-27
20H 44" 44-27
22H 50" 50-27

 

FTP-COMECA

 

Part#
26200		 Size Holes
42.362 x 4.500 x .350		 Description
16H M10 Model 82HY

 

COMO

Call for Information

 

CONSOLIDATED INTERNATIONAL/SWISS-HYDROCUT

 

Part#
28000
28010
28020
28030
28040
28050
28060
28070
28080
28090		 Size Holes
22.835 x 4.724 x .394
20.079 x 4.724 x .394 8/4
15.669 x 4.724 x .394
20.866 x 4.724 x .394
20.472 x 5.551 x .394
13.976 x 2.559 x .394
13.976 x 2.559 x .394
19.685 x 1.575 x .591
14.173 x 1.575 x .591
14.173 x 1.575 x .591		 Description
10/4 Hydromat-Front
8/4 Hydromat-Side
10 Front-2009-22
8 Side-2009-21 Lor R
Top Front 2009.43/1101
Top SD RT 2009.40/1108
Top SD LT 2009.40/1106
BT Front 2009.44/1102
BT SD LFT 2009.42/1107
BT SD RT 2009.42/1109

 

DEXTER BRACKET, EBA, EMBASSY INTERNATIONAL, FL , HORIZON,

Call for Information

 

HARRIS MACEY

 

Part#
30000
30010
30020
30030		 Size Holes
22.000 x 3.000 x .375
14.250 x 3.000 x .375
22.000 x .984 x .500
15.000 x .984 x .500		 Description
7H Top Front B-640-0-1504
5H Top Side B-600-0-1071
7S Bottom Front B-640-0-1506
5S` Bottom Side B-640-0-1067E

 

Part#
Model 640,642,562
30000
30000
30000
30000

 Model 630,636,542,543
30040
30050
30060
30070

 Punch Cut
30080		 Size Holes
Model 640,642,562
22.000 x 3.000 x .375
14.250 x 3.000 x .375
22.000 x .984 x .500
15.000 x .984 x .500

 Model 630,636,542,543
20.250 x 3.000 x .375
14.250 x 3.000 x .375
20.500 x .984 x .500
15.000 x .984 x .500

 Punch Cut
14.250 x 3.750 x .250		 Description
Model 640,642,562
7H Top Front B-640-0-1504
5H Top Side B-600-0-1071
7S Bottom Front B-640-0-1506
5S` Bottom Side B-640-0-1067E

Model 630,636,542,543
7H Top Front B-600-0-1072
5H Top side B-600-0-1071
7S Bottom Front B-600-0-1068E
5S Bottom Side B-600-0-1067E

 Punch Cut
5S C-635-0-1047

 

HARRIS SHERIDAN

Call for Information and Pricing

 

ITOH

 

Part#
36000
36010
36020
36030
36040
36050
36060		 Size Holes
42.125 x 5.118 x .500
48.031 x 5.512 x .500
54.724 x 5.906 x .539
55.510 x 5.910 x .540
61.417 x 5.906 x .539
66.929 x 5.906 x .539
74.803 x 6.496 x .559		 Description
22H Itoh 85
28H Itoh 100
30H Itoh 115
30H 115B/JAC 1150
32H Itoh 132
32H Itoh 147
36H Itoh 170

 

KOLBUS

 

Part#
Model HD
38000
38000
38000

 Model HD150
38030
38030

 Model MD155
38050
38060		 Size Holes
Model HD
22.047 x 4.530 x .394
17.322 x 4.527 x .394
17.322 x 4.527 x .394

 Model HD150
22.047 x 4.530 x .394
15.940 x 4.530 x .394

 Model MD155
21.260 x 4.500 x .388
16.380 x 4.500 x .388		 Description
Model HD
10H Top Front
6H Top Left
6H Top Right

 Model HD150
10H Top Front
9H Top Side L & R

 Model MD155
8H Top Front
6H Top Side L&R

 

LAWSON/WOHLENBERG

 

Part#
3 knife Trimmers
40000
40010
40020
40030
 Guillotine Knives
40040
40050
40060
40070
40080
40090
40100
40110
40120
40130
40140
40150
40160
40170
40180
40190
40200
40210
40220
40230
40240
40250
40260
40270
40280
40290
40300
40310
40320
40330
40340
40350
40360
40370
40380
40390
40400
40410
40420
40430
40440
40450
40460		 Size Holes
3 knife Trimmers
19.685 x 4.527 x .394
15.345 x 4.527 x .394
 16.693 x 4.527 x .394
22.047 x 4.527 x .394
 Guillotine Knives
35.433 x 3.937 x .392
37.795 x 5.118 x .393
38.189 x 5.118 x .423
39.763 x 5.118 x .470
40.945 x 5.118 x .469
41.732 x 4.921 x .472
42.126 x 4.921 x .472
42.913 x 4.724 x .472
43.307 x 4.921 x .472
47.638 x 6.299 x .541
48.000 x 5.000 x .495
48.819 x 5.118 x .423
50.393 x 5.511 x .541
51.000 x 5.000 x .496
52.756 x 4.921 x .472
53.000 x 5.000 x .495
54.330 x 4.921 x .472
58.000 x 5.000 x .496
58.000 x 5.000 x .496
59.000 x 5.000 x .495
60.039 x 6.299 x .541
61.811 x 5.512 x .541
62.000 x 5.000 x .496
62.795 x 4.921 x .472
63.000 x 5.000 x .495
63.000 x 5.000 x .495
64.000 x 5.000 x .495
66.000 x 5.000 x .495
67.000 x 5.000 x .495
67.716 x 5.512 x .551
70.078 x 5.512 x .551
72.000 x 5.000 x .496
72.000 x 5.000 x .496
73.000 x 5.000 x .495
73.622 x 7.087 x .659
75.591 x 5.512 x .659
77.000 x 5.000 x .496
80.000 x 5.000 x .495
80.906 x 6.299 x .630
83.000 x 5.000 x .496
95.669 x 6.299 x .630
102.00 x 5.000 x .495
125.00 x 5.000 x .495		 Description
3 knife Trimmers
12H 38F,44FS100,Whol Front
10H 38F,44FS100,Whol Side L&R
10H 44FS50 Side, RT340 Rapid
12H 44FS50 Fr,RT 343 Rapid Tr
Guillotine Knives
12H A 76 30" Whol
10H Regent KB-32 34 1/2"
7H A 78CG
9H A 86 S,A87 S
11H Regent 34 1/2"
10H Regent 35 3/8"
10H Wohl A86,88T, A90
22H Wohl 92G
11H Wohl 92F,90F
22H Wohl A 106/107
24H Lawson 38", 39"2AA2
11H Wohl A 105CG,A 106 dne
13H Regent 42" 42 1/4 A107E
2-BA-4002
13H Regent 44" A112A115
27H Pacemaker ll 42" 2BA 4016
14H Wohl 45 1/4" 115F
30H 46" 2BB4016, 2 1/2" E to Ct
30H 46" 2AB2-A 3"&1" E to Ct
30H Pacemaker III , IV 47" cut
22H Wohl A 132 S
15H Regent 52" A132u
30H Lawson 52" 2AC2F
16H Wohl 137F
33H Pacemaker 12-AC-4006,
33H Pacemaker 2-BC-4016
33H Pacemaker III IV 52" cut
33H Lawson 55"
33H Lawson 56" PM II
17H Wohl 59" A146, A150F
18H Wohl 61" cut 155F
36H PM II 59" cut
36H 60" cut 2AE4000 old
36H Pacemaker III 60" cut
36H Wohl A165 SH
19H Wohl A165U/168T
39H Mill Cutter old
39H Lawson 69" cut
20H Wohl A180F
42H Pacemaker III, IV 69" cut
24H Wohl A22OU
51H Pacemaker III, IV BH400000
63H Pacemaker III, IV 110" cut

 

LAWSON/REGENT
 

Part#
40470
40480
40490
40500		 Size Holes
37.795 x 5.118 x .394
41.732 x 4.921 x .472
50.393 x 5.512 x .541
52.756 x 4.921 x .472		 Description
KB-32 34 cut
35 3/8 cut
42 cut A107
44 cut A112, A115

 

MARTIN YALE

MAXIMA ADAST

Call for Information

 

MCCAIN

 

Part#
44000
44010
44020
44030
44040
44050
44060
44070
44080
44090		 Size Holes
21.250 x 5.000 x .500
13.000 x 5.000 x .495
21.312 x 1.500 x .531
13.375 x 1.500 x .531
13.375 x 1.500 x .344
13.313 x 1.750 x .562
13.313 x 1.750 x .562
13.000 x 4.500 x .250
13.000 x 4.500 x .312
13.000 x 4.500 x .375		 Description
6S Top Front MT1-1525C
4S Top Sides MT1-1088C
5S Bottom Front MT1-521C
4H Bottom Sides MT1-095B
6H Bottom Sides MT1-676B
Bottom Right CK-865-RC2
Bottom Left CK-865-LC2
1/4" punch cut CK-1864C-3
5/16" punch cut CK-1864C
3/8" punch cut CK-1864C-4

 

LOWER KNIFE SHIM KIT
 

Part#
44100
44110		 Description
Model 6-Hole
Model 4-Hole		  

 

MULLER MARTINI

MODEL 240/250

 

Part#
46000
46010
46020
46030
46040
46050
46060
46070
 MODEL 241/251
46080
46090
46100
46110
46120
46130
46140
46150
46160
46170
 MODEL 708/877
46180
46190
46200
46210
46220
46230
 		 Size Holes
21.654 x 3.150 x .472
15.551 x 3.150 x .472
21.259 x 1.969 x .591
14.488 x 1.575 x .591
14.488 x 1.575 x .591
21.259 x 1.969 x .591
14.488 x 1.575 x .591
14.488 x 1.575 x .591
 MODEL 241/251
14.173 x 1.575 x .591
14.173 x 1.575 x .590
21.653 x 3.740 x .315
20.866 x 3.740 x .315
14.370 x 2.362 x .315
21.260 x 1.576 x .591
14.646 x 1.576 x .591
21.850 x 1.575 x .591
14.646 x 1.004 x .591
14.646 x 1.004 x .591
 MODEL 708/877
19.291 x 5.512 x .236
13.189 x 2.559 x .236
13.189 x 2.559 x .236
19.685 x 1.578 x .591
13.386 x 1.578 x .591
13.386 x 1.578 x .591		 Description
6H Top Front 240.1424.2B
6H Top Sides L&R 240.1440.3B
6S Bottom Front 240.1443.3D
5H Bottom Side Left 240.1441.3D
5H Bottom Side Right 240.1442.3D
plastic Bottom Front 240.1975
plastic Bottom Side Left 240.1968
plastic Bottom Side Right 240.1969
MODEL 241/251
Bottom Left 890.0539.3
Bottom Right 890.0540.3
Top Front 251.2119.2
Top Front 251.2006.2C
Top Side L&R 251.2005.3C
Bottom Front 251.2004.3C
Bottom Side L&R 251.2003.3A
Bottom Front 251.2116.3
Bottom Side Left 251.2074.3B
Bottom Side Right 251.2073.3B
MODEL 708/877
Top Front 877.0708.2E
Top Left 877.0728.3
Top Right 877.0729.3
Bottom Front 877.0725.3A
Bottom Left 877.0730.3
Bottom Right 877.0731.3

 

MODEL 890

46320 20.472 x 5.512 x .236 14H Top Front 890.0535.2F

46330 20.275 x 5.512 x .236 14H Top Front 890.0535.2

46340 13.976 x 2.559 x .236 16H Top Side Right 890.0537.3B

46350 13.976 x 2.559 x .236 16H Top Side Left 890.0536.3B

46360 20.472 x 1.575 x .236 5H Bottom Front 890.0538.3D

46370 14.173 x 1.575 x .591 5H Bottom Side Right 890.0540.3B

46380 14.173 x 1.575 x .591 5H Bottom Side Left 890.0539.3B

46390 19.488 x 5.512 x .236 12H Top Front 890.0535.2B OLD

46400 19.882 x 1.575 x .591 5S Bottom Front 890.0538.3C OLD

46410 13.780 x 6.496 x .250 5S punch cut 890.2655.2

46411 13.780 x 6.496 x .236 5S 3/8 punch cut 890.2656.2

46420 13.780 x 2.283 x .236 7H Bottom Left 890.2644.3C

46430 13.780 x 2.283 x .236 7H Bottom Right 890.2645.3C

MODEL 1522

46450 16.535 x 2.933 x .236 12H Top Front 1522.1049.2A

46350 13.976 x 2.559 x .236 16H Top Side Left 890.0536.3B

46340 13.976 x 2.559 x .236 16H Top Side Right 890.0537.3B

46480 16.535 x 1.181 x .709 4H Bottom Front 1522.1050.3C

46490 14.173 x .925 x .591 4H Bottom Side Left 1522.1272.3A

46500 14.173 x .925 x .591 4H Bottom Side Right 1522.1271.3

46510 14.173 x .925 x .591 Bottom Side Left 1522.1310.3B

46520 14.173 x .925 x .591 Bottom Side Right 1522.1309.3

MODEL 3670

46240 22.047 x 3.149 x .472 12H Front 3670.1022.2B OLD

46250 15.430 x 3.149 x .472 8H Sides L&R 3670.2132.2B OLD

46260 17.322 x 3.149 x .472 8H Front 3670.2590.2

46270 12.677 x 3.149 x .472 6H Sides L&R 3670.2591.2

46280 21.259 x 3.543 x .472 12H Front 3670.4327.2 NEW

46290 15.433 x 3.543 x .472 8H Sides L&R 3670.4328.2 NEW

46300 16.535 x 3.543 x .472 8H Front 3670.4489.2

46310 12.677 x 3.543 x .472 6H Sides L&R 3670.4360.2

46510 16.000 x 3.543 x .472 Interchangable Sides L&R Corona 3672.2298.2

46520 16.411 x 3.543 x .472 Interchangable Sides L&R Merit 3671.1760.2B

 

PERFECTA

 

Part# Size Holes Description

Part # Size Hole Description

48090 21.260 x 4.528 x .394 Front PE48.22.024

48100 16.535 x 4.528 x .394 Side Left PE48.22.024

48110 16.535 x 4.528 x .394 Side Right PE48.22.024

48020 42.913 x 5.512 x .472 Seypa 92

48060 53.150 x 5.512 x .472 Seypa 115

48070 59.646 x 5.512 x .472 Seypa 132

48080 74.015 x 6.299 x .551 Seypa 168

 

PIVANO

MODEL TRIS 31 X 45

Part # Size Hole Description

48120 23.149 x 5.039 x .315 Front

48130 18.425 x 5.039 x .315 Side Left

48140 18.425 x 5.039 x .315 Side Right

MODEL 30 X 40

48150 21.181 x 5.039 x .315 Front

48160 18.031 x 5.039 x .315 Side Left

48170 18.031 x 5.039 x .315 Side Right

MODEL HARRIS/USA 31-45RT

48180 22.441 x 4.528 x .394 Front

48190 17.992 x 4.528 x .394 Side Left

48200 17.992 x 4.528 x .394 Side Right

50000 39.567 x 4.724 x .394 14H FG76

50030 42.126 x 5.079 x .394 18H FG82SRHE

50040 50.394 x 4.921 x .472 22H FG105

50050 51.850 x 5.709 x .472 30H FG103/S/N

50070 54.921 x 5.709 x .472 33H FG108

50100 55.590 x 5.630.x .472 24H FG112H

50130 62.480 x 5.709 x .512 36H FG118H

50140 65.748 x 6.102 x .512 28H FG135H

50150 79.212 x 7.086 x .708 34H FG170

 

POLAR Hole pattern up and down

 

Part# Size Holes Description

Part # Size Hole Description

52000 26.698 x 3.740 x .381 14H Model 55

52010 28.149 x 3.740 x .381 14H Model 58

52020 34.173 x 4.330 x .381 12H Model 71,72,75 28 cut

52030 36.417 x 4.330 x .381 12H Model 76 30 cut

52050 38.976 x 4.213 x .381 10H Model 82EL 32 cut

52060 38.976 x 4.213 x .461 or .381 10H Model 82EL ET ST

52070 43.110 x 4.528 x .461 11H Model 92 EL CE 35 5/8 cut

52090 54.724 x 6.300 x .541 26H Model 115 EL CE

52110 63.188 x 6.300 x .541 30H Model 137

52150 68.306 x 6.300 x .541 32H Model 150 EL

52160 70.271 x 6.300 x .541 32H Model 155EL CE 61 cut

 

POLAR NEW STYLE Straight hole pattern

52170 43.110 x 4.528 x .461 11H Model 92NWM /90

52180 54.724 x 6.300 x .541 26H Model 115NWM

52190 63.188 x 6.300 x .541 30H Model 137NWM

52200 70.271 x 6.300 x .541 32H Model 155NWM

52210 78.543 x 6.300 x .541 54H Model 176NWM

 

ROSSBACK

 

Part# Size Holes Description

Part # Size Hole Description

54000 16.250 x 3.000 x .496 7H Top Front 250-78

54010 17.000 x 1.500 x .500 4H Bottom Front 250-76

54020 12.500 x 3.000 x .496 7H Top Side L&R 250-77

54030 13.375 x 1.500 x .500 Bottom Side L&R 250-75

 

SCHIMANEK

 

Part# Size Holes Description

Part # Size Hole Description

56000 37.402 x 4.331 x .394 7H 2552 28" cut

56010 39.370 x 4.528 x .354 8H Model 81 32" cut

56020 40.551 x 4.528 x .354 8H SSH81 , 82

56030 40.945 x 4.528 x .354 7H 32 1/2" cut

56040 43.307 x 4.724 x .394 8H 33" & 34" cut

56050 46.457 x 4.527 x .394 9H 35" & 35 1/2" cut

56060 47.638 x 4.528 x .394 18H 37" cut

56070 47.638 x 4.528 x .498 9H 37" cut

56080 49.212 x 4.921 x .498 9H 39" cut

56090 53.543 x 5.512 x .498 10H H-S-107 42" cut

56100 54.000 x 5.512 x .470 9H 1/2-13 thread

56110 59.566 x 5.512 x .472 10H 47" cut

56120 68.000 x 5.512 x .472 57" cut

 

SCHNEIDER/SENATOR

 

Part# Size Holes Description

Part # Size Hole Description

58000 35.827 x 4.134 x .392 12H Model 76

58010 38.583 x 5.236 x .392 24H Model 78

58020 38.976 x 4.724 x .315 24H Model 85,86 34" cut

58030 40.157 x 5.236 x .392 24H Model 82

58040 42.913 x 5.197 x .392 27H Model 92

58050 50.394 x 5.669 x .392 33H Model 106

58060 53.149 x 5.669 x .392 36H Model 115MC

58070 61.653 x 5.669 x .470 39H Model 132 52" cut

58080 74.016 x 5.866 x .470 45H Model 155/157

58090 86.220 x 5.866 x .470 54H Model 185

58100 116.142 x 5.866 x .470 75H Model 260 102 1/2" cut

  

SEYBOLD

 

Part# Size Holes Description

Part # Size Hole Description

60060 45.000 x 5.000 x .496 21H 34-35 1/2" cut

60110 51.000 x 5.000 x .496 24H 40-41" cut angle end

60140 53.000 x 5.000 x .496 24H 41-42" cut Saber , Citation

60150 55.000 x 5.000 x .496 27H 44" cut Dayton

60170 57.000 x 5.000 x .496 27H 44" cut Sixty

60190 57.087 x 5.512 x .496 27H 46 1/2" cut Cluster holes

60200 59.000 x 5.000 x .496 27H 47" cut Saber

60210 61.000 x 5.000 x. 496 30H 50" cut Dayton

60240 63.000 x 5.000 x .496 30H 50" cut Sixty

60250 66.000 x 5.000 x .496 30H 54" cut Saber

60260 67.000 x 5.000 x .496 33H 56" cut Dayton

60280 70.000 x 5.000 x. 496 33H 58" cut Saber

60300 75.000 x 5.000 x .496 36H 64" cut Dayton

60310 77.750 x 5.000 x .496 36H 65" cut CJMill Sixty Saber

60330 85.000 x 5.000 x .496 28H 74" cut Dayton

60350 97.750 x 5.000 x .496 45H 84" cut Sixty

60360 101.50 x 5.000 x .496 51H 90" cut CJMill

60370 105.00 x 5.000 x .496 51H 94" cut CJMill Dayton

60380 111.75 x 5.000 x .496 54H 100" cut CJMill

60390 123.50 x 5.500 x .496 60H 112" cut CJMill

 

SHERIDAN

 

Part# Size Holes Description

Part # Size Hole Description

MODEL CT

32090 21.500 x 5.000 x .500 Top Front CT-14B-218

32100 14.000 x 5.000 x .500 Top Sides CT-551-1 R&L

32160 14.500 x 5.000 x .500 Top Sides CT-15C-354 Clip

32170 14.500 x 5.000 x .500 Top Sides CT-553.23 R side

32180 14.500 x 5.000 x .500 Top Side CT-551-45 L side only

32110 19.750 x 1.750 x .500 Bottom FR Ct-432-2 CT325

32120 19.750 x 1.750 x .500 Plastic White Bottom FR Ct-432-2 CT 325

32130 13.000 x 1.250 x .500 Bottom Sides CT-551-11x 2

32140 13.000 x 1.250 x .500 Plastic White Bottom Sides CT-551-11x 2

MODEL HT

32280 18.000 x 4.500 x .250 Top Front HT-11B103ACT

32230 20.250 x 4.500 x .250 Top Front HT-11B103G

32240 23.000 x 4.500 x .250 Top Front HT-11B103

32250 12.750 x 4.000 x .250 Top Sides L&R HT-12C-105

32260 21.000 x 1.250 x .500 Bottom Fr HT-11B104A

32270 12.500 x 1.250 x .500 Bottom Sides HT-12B107A

MODEL HT-18

32290 14.000 x 4.500 x .250 Top Front HT-31C122

32300 11.250 x 4.000 x .250 Top Side HT-32C100

32310 10.625 x 4.000 x .250 Top side HT-32C103

32320 15.000 x 1.250 x .500 Bottom Fr HT-31C121

32340 12.500 x 1.250 x .500 Bottom Sides HT-12B107A

MODEL HT-151

32370 15.000 x 4.500 x .250 Top Front HT-51-162

32380 12.250 x 4.250 x .375 Top Side HT52-102

32390 12.250 x 3.000 x .375 Top Side HT52-220

32400 12.250 x 4.250 x .500 Top Side HT52-212

32410 15.000 x 1.250 x .500 Bottom Fr HT-31C121

32420 18.250 x 1.250 x .500 Bottom Side HT52-202

SHERIDAN (Continued)

MODEL VT

32360 25.000 x 5.500 x .500 Front Top 14658-2

32350 20.000 x 5.500 x .500 Top Side L&R 144389-1

 

STAHL

 

Part# Size Holes Description

Part # Size Hole Description

MODEL SN 130

33360 18.110 x 5.118 x .465 Front Blade

33370 16.142 x 5.709 x .465 Left Side Blade

33380 16.142 x 5.118 x .465 Right Side Blade

MODEL SN 138

33390 18.700 x 5.118 x .465 Front Blade

33400 15.945 x 5.905 x .622 Left Side Blade

33410 15.945 x 5.905 x .622 Right Side Blade

MODEL SN 200T

33420 18.700 x 5.118 x .465 Front Blade

33430 17.323 x 5.905 x .622 Left Side Blade

33440 17.323 x 5.905 x .622 Right Side Blade

MODEL VBF 135

33450 18.700 x 5.118 x .465 Front Blade

33460 16.732 x 5.905 x .622 Left Side Blade

33470 16.732 x 5.905 x .622 Right Side Blade

 

TRIUMPH/IDEAL/MICHEAL MIRACLE

 

Part# Size Holes Description

Part # Size Hole Description

62000 16.732 x 1.535 x .236 6S 36-650 14" cut

62010 17.480 x 1.535 x .236 5 Round Holes Model 0651 39-2900

62020 17.913 x 2.362 x .236 6S Model 38E 15" cut

62030 22.440 x 3.465 x .315 5 Slotted Holes Manual 0652 18" cut

62040 22.440 x 3.465 x .394 5 Round Holes Elect 46,48, 18" cut

62050 24.803 x 3.465 x .315 5 Slotted Holes Model 52-654 20 1/2" cut

62060 24.803 x 3.543 x .394 5 Round Holes Model 52-655 20 1/2" cut

62070 24.803 x 3.543 x .394 5H CL Corners Model 5221 Fully Auto Elect

62080 29.764 x 3.543 x .394 5H Model 6550 24" cut

62110 33.071 x 3.937 x .394 6H Model 7228 28" cut

62120 36.024 x 3.543 x .354 6H LMM72, 28" cut

62130 29.920 x 3.150 x .315 5H 656, 24" cut

62140 30.709 x 3.150 x .315 5H LMM62, 24" cut

62150 39.960 x 3.543 x .354 7H 82,32" cut

62160 43.898 x 4.134 x .394 8H LMM238,92 36" cut

62170 53.543 x 4.724 x .433 9H 115 46" cut

62180 61.417 x 4.724 x .433 11H LMM132 52" cut

62190 68.504 x 4.724 x .433 12H LMM 150 59" cut